Sistema de recolección de energía proveniente del ambiente utilizando un sensor piezoeléctrico

Simple item page
dc.contributor.advisorPárraga Meneses, Manuel Fernandospa
dc.contributor.authorForero Briceño, Jonnathan Juliánspa
dc.contributor.authorSalazar Ibarra, José Álvarospa
dc.date.accessioned2021-03-02T13:59:30Z
dc.date.available2021-03-02T13:59:30Z
dc.date.issued2020-07-17spa
dc.description.abstractEnergy harvesting coming from the environment generally from unused sources is essential in a society with growing energy demand. In most cases, these sources have limited amounts of energy, which can be used in low-power devices and limited access areas. As a solution to this type of problem, technologies capable of taking advantage of this energy are developed, thanks to the creation of self-powered systems that also have a better impact on the environment. Entering in this technology two devices are postulated, the SPV1050 and the ADP5091, capable of storing, managing, and supplying the energy collected by specific transducers: photovoltaic cells and piezoelectric sensors. Simultaneously, the behavior of an acoustic energy harvester is analyzed. From its simulation in the Ansys CAE tool, solving the problem in a decoupled way, the modal response of a Helmholtz resonator with the hexagonal section is obtained. Likewise, the modal and voltage response of the series bimorph piezoelectric cantilever beam is achieved. The analysis carried out has the purpose of finding the behavior of the collection system for future implementation, making use of some of the proposed management systems.eng
dc.description.abstractLa recolección de energía proveniente del ambiente generalmente de fuentes no utilizadas se hace indispensable en una sociedad con una creciente demanda energética. En la mayoría de casos estas fuentes presentan cantidades limitadas de energía, que puede ser usada en dispositivos de bajo consumo y en áreas con acceso limitado. Como solución a este tipo de problemas se desarrollan tecnologías capaces de aprovechar esta energía, gracias a la creación de sistemas autoalimentados que además presentan un mejor impacto en el ambiente. Incursionando en esta tecnología se postulan dos dispositivos, como lo son el SPV1050 y el ADP5091, capaces de almacenar, gestionar, y suministrar la energía recolectada por transductores específicos: celdas fotovoltaicas y sensores piezoeléctricos. En simultáneo, se analiza el comportamiento de un recolector de energía acústico. A partir de su simulación en la herramienta CAE de Ansys, resolviendo el problema de forma desacoplada, se obtiene la respuesta modal de un resonador Helmholtz con sección hexagonal. Así mismo, se consigue la respuesta modal y en voltaje del voladizo piezoeléctrico bimorfo en serie. El análisis realizado tiene la finalidad de encontrar el comportamiento del sistema de recolección para una implementación futura, haciendo uso de alguno de los sistemas de gestión propuestos.spa
dc.description.degreelevelPregradospa
dc.description.degreenameIngeniero(a) Mecatrónico(a)spa
dc.description.funderCosto total del proyecto $1.200.000. Financiación propia $280.000. Financiación UAN $920.000.es_ES
dc.description.notesPresencialspa
dc.identifier.bibliographicCitationAhmadi, M. H., Ghazvini, M., Nazari, M. A., Ahmadi, M. A., Pourfayaz, F., Lorenzini, G., & Ming, T. (2019). Renewable energy harvesting with the application of nanotechnology: A review. International Journal of Energy Research, 43(4), 1387–1410. https://doi.org/10.1002/er.4282spa
dc.identifier.bibliographicCitationAlghisi, D., Ferrari, V., Ferrari, M., Crescini, D., Touati, F., & Mnaouer, A. B. (2017). Single- and multi-source battery-less power management circuits for piezoelectric energy harvesting systems. Sensors and Actuators, A: Physical, 264, 234–246. https://doi.org/10.1016/j.sna.2017.07.027spa
dc.identifier.bibliographicCitationAloulou, R., Lucas De Peslouan, P. O., Mnif, H., Alicalapa, F., Lan Sun Luk, J. D., & Loulou, M. (2016). A power management system for energy harvesting and wireless sensor networks application based on a novel charge pump circuit. International Journal of Electronics, 103(5), 841–852. https://doi.org/10.1080/00207217.2015.1072848spa
dc.identifier.bibliographicCitationAnjum, M. U., Fida, A., Ahmad, I., & Iftikhar, A. (2018). A broadband electromagnetic type energy harvester for smart sensor devices in biomedical applications. Sensors and Actuators, A: Physical, 277, 52–59. https://doi.org/10.1016/j.sna.2018.05.001spa
dc.identifier.bibliographicCitationBai, Y., Jantunen, H., & Juuti, J. (2018). Energy harvesting research: The road from single source to multisource. Advanced Materials, 30(34), 1–41. https://doi.org/10.1002/adma.201707271spa
dc.identifier.bibliographicCitationBarroca, N., Saraiva, H. M., Gouveia, P. T., Tavares, J., Borges, L. M., Velez, F. J., Loss, C., Salvado, R., Pinho, P., Gonçalves, R., Borgescarvalho, N., Chavéz-Santiago, R., & Balasingham, I. (2013). Antennas and circuits for ambient RF energy harvesting in wireless body area networks. IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, PIMRC, 532–537. https://doi.org/10.1109/PIMRC.2013.6666194spa
dc.identifier.bibliographicCitationBatarseh, I., & Harb, A. (2017). Power Electronics: Circuit analysis and design. En Power Electronics: Circuit Analysis and Design. https://doi.org/10.1007/978-3-319-68366-9 Bizon, N., Tabatabaei, N. M., Blaabjerg, F., & Kurt, E. (2017). Energy Harvesting and Energy Efficiency: Technology, Methods, and Applications. https://doi.org/10.1007/978-3-319-49875-1spa
dc.identifier.bibliographicCitationCaliò, R., Rongala, U. B., Camboni, D., Milazzo, M., Stefanini, C., de Petris, G., & Oddo, C. M. (2014). Piezoelectric energy harvesting solutions. Sensors (Switzerland), 14(3), 4755–4790. https://doi.org/10.3390/s140304755spa
dc.identifier.bibliographicCitationCamilo, C., & Restrepo, A. (2015). Orígenes de las Leyes de conservación como un principio unificador de las Ciencias Naturales. El caso de la invarianza de la energía en la físicaspa
dc.identifier.bibliographicCitationCan, A., Leclercq, L., Lelong, J., & Botteldooren, D. (2010). Traffic noise spectrum analysis: Dynamic modeling vs. experimental observations. Applied Acoustics, 71(8), 764–770. https://doi.org/10.1016/j.apacoust.2010.04.002spa
dc.identifier.bibliographicCitationCansiz, M., Altinel, D., & Kurt, G. K. (2019). Efficiency in RF energy harvesting systems: A comprehensive review. Energy, 174, 292–309. https://doi.org/10.1016/j.energy.2019.02.100spa
dc.identifier.bibliographicCitationChapman, S. J. (2014). Máquinas eléctricasspa
dc.identifier.bibliographicCitationChew, Z. J., & Zhu, M. (2015). Low power adaptive power management with energy aware interface for wireless sensor nodes powered using piezoelectric energy harvesting. 2015 IEEE SENSORS - Proceedings, 2–5. https://doi.org/10.1109/ICSENS.2015.7370663spa
dc.identifier.bibliographicCitationDaniels, A., Zhu, M., & Tiwari, A. (2013). Evaluation of piezoelectric material properties for a higher power output from energy harvesters with insight into material selection using a coupled piezoelectric-circuit-finite element method. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 60(12), 2626–2633. https://doi.org/10.1109/TUFFC.2013.2861spa
dc.identifier.bibliographicCitationDíez, P. L., Gabilondo, I., Alarcón, E., & Moll, F. (2018). A Comprehensive Method to Taxonomize Mechanical Energy Harvesting Technologies. Proceedings - IEEE International Symposium on Circuits and Systems, 2018-May. https://doi.org/10.1109/ISCAS.2018.8350907spa
dc.identifier.bibliographicCitationEdy Susanto, M. (2019). Energy Harvesting Systems: Principles, Modeling and Applications. En Journal of Chemical Information and Modeling (Vol. 53, Número 9). https://doi.org/10.1017/CBO9781107415324.004spa
dc.identifier.bibliographicCitationErturk, A., & Inman, D. J. (2011). Piezoelectric Energy Harvesting. En Piezoelectric Energy Harvesting. https://doi.org/10.1002/9781119991151spa
dc.identifier.bibliographicCitationFraden, J. (2016). Handbook of Modern Sensors. En Handbook of Modern Sensors. https://doi.org/10.1007/978-3-319-19303-8spa
dc.identifier.bibliographicCitationGautschi, G., 2013. Piezoelectric Sensorics. Springer.spa
dc.identifier.bibliographicCitationGaynor, M., & Waterman, J. (2016). Design framework for sensors and RFID tags with healthcare applications. Health Policy and Technology, 5(4), 357–369. https://doi.org/10.1016/j.hlpt.2016.07.007spa
dc.identifier.bibliographicCitationHarrop, P., & Das, R. (2009). Energy Harvesting and Storage for Electronic Devices 2009-2019. IDTechEx. https://www.idtechex.com/en/research-report/energy-harvesting-and-storage-for-electronic-devices-2009-2019/217spa
dc.identifier.bibliographicCitationHawkes, R. L., Iqbal, J., Mansour, F., Milner-Bolotin, M., & Williams, P. J. (2019). Physics for scientists and engineers: an interactive approach. Nelsonspa
dc.identifier.bibliographicCitationHehn, T., & Manoli, Y. (2015). CMOS Circuits for Piezoelectric Energy Harvesters (Vol. 38). https://doi.org/10.1007/978-94-017-9288-2spa
dc.identifier.bibliographicCitationHeywang, W., Lubitz, K., & Wersing, W. (Eds.). (2008). Piezoelectricity: evolution and future of a technology (Vol. 114). Springer Science & Business Mediaspa
dc.identifier.bibliographicCitationJamadar, V., Pingle, P., & Kanase, S. (2017). Possibility of harvesting Vibration energy from power producing devices: A review. International Conference on Automatic Control and Dynamic Optimization Techniques, ICACDOT 2016, 496–503. https://doi.org/10.1109/ICACDOT.2016.7877635spa
dc.identifier.bibliographicCitationJanek, J., & Zeier, W. G. (2016). A solid future for battery development. Nature Energy, 1(9), 1–4. https://doi.org/10.1038/nenergy.2016.141spa
dc.identifier.bibliographicCitationKarami, N., Moubayed, N., & Outbib, R. (2017). General review and classification of different MPPT Techniques. Renewable and Sustainable Energy Reviews, 68(July 2016), 1–18. https://doi.org/10.1016/j.rser.2016.09.132spa
dc.identifier.bibliographicCitationKazimierczuk, M. K. (2016). Pulse-Width Modulated DC–DC Power Convertersspa
dc.identifier.bibliographicCitationKhan, F. U., & Qadir, M. U. (2016). State-of-the-art in vibration-based electrostatic energy harvesting. Journal of Micromechanics and Microengineering, 26(10), 103001. https://doi.org/10.1088/0960-1317/26/10/103001spa
dc.identifier.bibliographicCitationKinsler, L. E., Frey, A. R., & Mayer, W. G. (1963). Fundamentals of Acoustics. Physics Today, 16(8), 56–57. https://doi.org/10.1063/1.3051072spa
dc.identifier.bibliographicCitationLarsen, O. N., & Wahlberg, M. (2017). Sound and sound sources. Comparative bioacoustics: An overview, 3-60spa
dc.identifier.bibliographicCitationLiu, H., Zhong, J., Lee, C., Lee, S. W., & Lin, L. (2018). A comprehensive review on piezoelectric energy harvesting technology: Materials, mechanisms, and applications. Applied Physics Reviews, 5(4). https://doi.org/10.1063/1.5074184spa
dc.identifier.bibliographicCitationLuo, F. L., & Ye, H. (2018). Power electronics: Advanced conversion technologies, second edition. En Power Electronics: Advanced Conversion Technologies, Second Edition. https://doi.org/10.1201/9781315186276spa
dc.identifier.bibliographicCitationLuo, X., Wang, J., Dooner, M., & Clarke, J. (2015). Overview of current development in electrical energy storage technologies and the application potential in power system operation. Applied Energy, 137, 511–536. https://doi.org/10.1016/j.apenergy.2014.09.081spa
dc.identifier.bibliographicCitationMohanty, A., Parida, S., Behera, R. K., & Roy, T. (2019). Vibration energy harvesting: A review. Journal of Advanced Dielectrics, 9(4). https://doi.org/10.1142/S2010135X19300019spa
dc.identifier.bibliographicCitationMohapatra, A., Nayak, B., Das, P., & Mohanty, K. B. (2017). A review on MPPT techniques of PV system under partial shading condition. Renewable and Sustainable Energy Reviews, 80(February), 854–867. https://doi.org/10.1016/j.rser.2017.05.083spa
dc.identifier.bibliographicCitationNewnham, R. E. (1992). Piezoelectric sensors and actuators: smart materials. En Proceedings of the Annual Frequency Control Symposium. https://doi.org/10.1109/freq.1992.269973spa
dc.identifier.bibliographicCitationNikolaev, V. A., Sieler, J., Nikolaev, V. V., Rodina, L. L., & Schulze, B. (2001). O-alkylation of amide carbonyl group with Diazo compounds: A new way for functionalizing saccharin and its analogs. En Russian Journal of Organic Chemistry (Vol. 37, Número 8). https://doi.org/10.1023/A:1013117120223spa
dc.identifier.bibliographicCitationNoh, S., Lee, H., & Choi, B. (2013). A study on the acoustic energy harvesting with Helmholtz resonator and piezoelectric cantilevers. International Journal of Precision Engineering and Manufacturing, 14(9), 1629–1635. https://doi.org/10.1007/s12541-013-0220-xspa
dc.identifier.bibliographicCitationNoticias ONU. (2018). Las ciudades seguirán creciendo, sobre todo en los países en desarrollo. ONU DAES Naciones Unidas Departamento de Asuntos Económicos y Sociales. https://www.un.org/development/desa/es/news/population/2018-world-urbanization-prospects.htmlspa
dc.identifier.bibliographicCitationObidike, I., Nwabueze, C., Onwuzuruike, K., & Onuzulike, C. V. (2019). Energy Harvester : Alternative Source for Powering Electronic Devices. March, 53–57spa
dc.identifier.bibliographicCitationOgunniyi, E. O., & Pienaar, H. C. V. Z. (2017). Overview of battery energy storage system advancement for renewable (photovoltaic) energy applications. Proceedings of the 25th Conference on the Domestic Use of Energy, DUE 2017, April, 233–239. https://doi.org/10.23919/DUE.2017.7931849spa
dc.identifier.bibliographicCitationPillai, M. A., & Ezhilarasi, D. (2016). Improved Acoustic Energy Harvester Using Tapered Neck Helmholtz Resonator and Piezoelectric Cantilever Undergoing Concurrent Bending and Twisting. Procedia Engineering, 144, 674–681. https://doi.org/10.1016/j.proeng.2016.05.065spa
dc.identifier.bibliographicCitationPrauzek, M., Konecny, J., Borova, M., Janosova, K., Hlavica, J., & Musilek, P. (2018). Energy harvesting sources, storage devices and system topologies for environmental wireless sensor networks: A review. Sensors (Switzerland), 18(8). https://doi.org/10.3390/s18082446spa
dc.identifier.bibliographicCitationRossell Turull; Ivana; Soler Rocasalbas; Sergi; Vila Deutschbein. (2005). Resonadores de helmholtz de boca rectangular y cuello de longitud pequeña. 1–7. http://www.sea-acustica.es/fileadmin/publicaciones/Terrassa05_AFS004.pdfspa
dc.identifier.bibliographicCitationRuido - Secretaria Distrital de Ambiente. (2014). http://ambientebogota.gov.co/ruidospa
dc.identifier.bibliographicCitationRupitsch, S. J. (2018). Piezoelectric Sensors and Actuators. Springer-Verlag Berlin Heidelberg, Heidelbergspa
dc.identifier.bibliographicCitationSarker, M. R., Julai, S., Sabri, M. F. M., Said, S. M., Islam, M. M., & Tahir, M. (2019). Review of piezoelectric energy harvesting system and application of optimization techniques to enhance the performance of the harvesting system. En Sensors and Actuators, A: Physical (Vol. 300). Elsevier B.V. https://doi.org/10.1016/j.sna.2019.111634spa
dc.identifier.bibliographicCitationSerhan, H. A., & Ahmed, E. M. (2018). Effect of the different charging techniques on battery life-time: Review. Proceedings of 2018 International Conference on Innovative Trends in Computer Engineering, ITCE 2018, 2018-March, 421–426. https://doi.org/10.1109/ITCE.2018.8316661spa
dc.identifier.bibliographicCitationShaikh, F. K., & Zeadally, S. (2016). Energy harvesting in wireless sensor networks: A comprehensive review. Renewable and Sustainable Energy Reviews, 55, 1041–1054. https://doi.org/10.1016/j.rser.2015.11.010spa
dc.identifier.bibliographicCitationShu, Y. C., & Lien, I. C. (2006). Analysis of power output for piezoelectric energy harvesting systems. Smart Materials and Structures, 15(6), 1499–1512. https://doi.org/10.1088/0964-1726/15/6/001spa
dc.identifier.bibliographicCitationSimpson, C. (2011). Linear and Switching Voltage Reglator Fundamental part 1. 31. http://www.ti.com/lit/an/snva559/snva559.pdfspa
dc.identifier.bibliographicCitationSpv, T. (2018). Ultralow power energy harvester and battery charger VFQFPN 3 x 3 x 1 mm 20L Die form. May, 1–36spa
dc.identifier.bibliographicCitationTichý, J., Erhart, J., Kittinger, E., & Privratska, J. (2010). Fundamentals of piezoelectric sensorics: mechanical, dielectric, and thermodynamical properties of piezoelectric materials. Springer Science & Business Mediaspa
dc.identifier.bibliographicCitationTran, L. G., Cha, H. K., & Park, W. T. (2017). RF power harvesting: a review on designing methodologies and applications. Micro and Nano Systems Letters, 5(1). https://doi.org/10.1186/s40486-017-0051-0spa
dc.identifier.bibliographicCitationTurkmen, A. C., & Celik, C. (2018). Energy harvesting with the piezoelectric material integrated shoe. Energy, 150, 556–564. https://doi.org/10.1016/j.energy.2017.12.159spa
dc.identifier.bibliographicCitationWang, Y., Zhu, X., Zhang, T., Bano, S., Pan, H., Qi, L., Zhang, Z., & Yuan, Y. (2018). A renewable low-frequency acoustic energy harvesting noise barrier for high-speed railways using a Helmholtz resonator and a PVDF film. https://doi.org/10.1016/j.apenergy.2018.08.080spa
dc.identifier.bibliographicCitationWang, Z. L. (2017). On Maxwell’s displacement current for energy and sensors: the origin of nanogenerators. Materials Today, 20(2), 74–82. https://doi.org/10.1016/j.mattod.2016.12.001spa
dc.identifier.bibliographicCitationWei, C., & Jing, X. (2017). A comprehensive review on vibration energy harvesting: Modelling and realization. Renewable and Sustainable Energy Reviews, 74(January), 1–18. https://doi.org/10.1016/j.rser.2017.01.073spa
dc.identifier.bibliographicCitationWei, H., Wang, H., Xia, Y., Cui, D., Shi, Y., Dong, M., Liu, C., Ding, T., Zhang, J., Ma, Y., Wang, N., Wang, Z., Sun, Y., Wei, R., & Guo, Z. (2018). An overview of lead-free piezoelectric materials and devices. Journal of Materials Chemistry C, 6(46), 12446–12467. https://doi.org/10.1039/c8tc04515aspa
dc.identifier.bibliographicCitationYang, J. (2005). An introduction to the theory of piezoelectricity (Vol. 9). New York: Springerspa
dc.identifier.bibliographicCitationYu, H., & Wu, H. (2017). Design of power management ASIC for piezoelectric energy harvester. Proceedings of IEEE Sensors, 5–7. https://doi.org/10.1109/ICSENS.2016.7808750spa
dc.identifier.bibliographicCitationYuan, M., Cao, Z., Luo, J., & Chou, X. (2019). Recent developments of acoustic energy harvesting: A review. Micromachines, 10(1). https://doi.org/10.3390/mi10010048spa
dc.identifier.bibliographicCitationYunda, J. (2018). Bogotá es una de las ciudades con más densidad poblacional del mundo. El Tiempo. https://www.eltiempo.com/bogota/bogota-es-una-de-las-ciudades-con-mas-densidad-poblacional-del-mundo-240412spa
dc.identifier.bibliographicCitationZakeri, B., & Syri, S. (2015). Electrical energy storage systems: A comparative life cycle cost analysis. Renewable and Sustainable Energy Reviews, 42, 569–596. https://doi.org/10.1016/j.rser.2014.10.011spa
dc.identifier.bibliographicCitationZhou, M., Al-Furjan, M. S. H., Zou, J., & Liu, W. (2018). A review on heat and mechanical energy harvesting from human – Principles, prototypes and perspectives. Renewable and Sustainable Energy Reviews, 82(October 2016), 3582–3609. https://doi.org/10.1016/j.rser.2017.10.102spa
dc.identifier.instnameinstname:Universidad Antonio Nariñospa
dc.identifier.reponamereponame:Repositorio Institucional UANspa
dc.identifier.repourlrepourl:https://repositorio.uan.edu.co/spa
dc.identifier.urihttp://repositorio.uan.edu.co/handle/123456789/2209
dc.language.isospaspa
dc.publisherUniversidad Antonio Nariñospa
dc.publisher.campusBogotá - Surspa
dc.publisher.facultyFacultad de Ingeniería Mecánica, Electrónica y Biomédicaspa
dc.publisher.programIngeniería Mecatrónicaspa
dc.rightsAcceso abierto
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.rights.coarhttp://purl.org/coar/access_right/c_abf2spa
dc.rights.licenseAttribution-NonCommercial 4.0 International (CC BY-NC 4.0)spa
dc.rights.urihttps://creativecommons.org/licenses/by-nc/4.0/spa
dc.subjectEnergíaes_ES
dc.subjectRecolección de energíaes_ES
dc.subjectGestión de energíaes_ES
dc.subjectSistemas autoalimentadoses_ES
dc.subjectGenerador piezoeléctricoes_ES
dc.subjectViga en voladizoes_ES
dc.subjectVibraciónes_ES
dc.subject.keywordEnergyes_ES
dc.subject.keywordEnergy harvestinges_ES
dc.subject.keywordPower managamentes_ES
dc.subject.keywordSelf-powered systemses_ES
dc.subject.keywordPiezoelectric generatores_ES
dc.subject.keywordCantilever beames_ES
dc.subject.keywordVibrationes_ES
dc.titleSistema de recolección de energía proveniente del ambiente utilizando un sensor piezoeléctricoes_ES
dc.typeTrabajo de grado (Pregrado y/o Especialización)spa
dc.type.coarhttp://purl.org/coar/resource_type/c_7a1fspa
dc.type.coarversionhttp://purl.org/coar/version/c_970fb48d4fbd8a85
dc.type.versioninfo:eu-repo/semantics/acceptedVersionspa
Files
Original bundle
Now showing 1 - 3 of 3
Thumbnail Image
Name:
2020JonnathanJuliánForeroBriceño.pdf
Size:
7.02 MB
Format:
Adobe Portable Document Format
Description:
Trabajo de grado
Download
thumbnail.default.alt
Name:
2020AutorizacióndeAutores.pdf
Size:
295.03 KB
Format:
Adobe Portable Document Format
Description:
Autorización de primer autor
thumbnail.default.alt
Name:
2020AutorizacióndeAutores.pdf
Size:
313.92 KB
Format:
Adobe Portable Document Format
Description:
Autorización de primer autor
License bundle
Now showing 1 - 1 of 1
thumbnail.default.alt
Name:
license.txt
Size:
2.65 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Ingeniería mecánica