Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.uan.edu.co/handle/123456789/2734

Logo





Título : Evaluación de la resistencia a la fractura de bases protésicas en prótesis totales utilizando insertos metálicos
metadata.dc.creator: Mantilla Nieto, Leonardo
Romero Redondo, Davier David
metadata.dc.contributor.advisor: Aguilar, Exiomara
Bautista, Cesar Augusto
Palabras clave : Prótesis;Base acrílica;Inserto;Deflexión
Resumen : Objectives: To evaluate the fracture resistance of thermocuring acrylic resins used for the production of prosthetic bases for total prostheses, using metal inserts. Materials and methods: Thirty (30) samples, in heat-curing PMMA, Veracryl referenced VR1 by New Stetic, distributed in three (3) groups of 10 each, identified SR (no reinforcement), RM (mesh reinforcement), RR (grid reinforcement). They were subjected to vertical force on a deflection bench, at a constant force in Kgf, until a fracture was reached. The present study is qualitative in vitro. Results : When comparing the acrylic samples for thermocuring prosthetic base distributed in three groups of the samples in without metallic insert (10), mesh insert (10) and insert with grid (10) and subjecting them to load tests in a deflection bench, it was determined that there is no significant statistical difference because they are out of the range p = 0. 05, in terms of flexural strength, but there were observational differences in structural conservation by the samples with insert (mesh and grid) from those that did not contain them and which were dispersed. Conclusions: It can be concluded, based on the results of the applied statistical tool that the fracture resistance does not present significant differences in the sample groups of the analyzed tests, determining that the samples that contained inserts (mesh and/or grid), compared with those that did not contain any type of insert, the fracture resistance for each one of the samples are not very different, existing slightly superior values in the group without reinforcement.
metadata.dc.description.tableofcontents: Objetivos: Evaluar la resistencia a la fractura de las resinas acrílicas de termocurado utilizadas para la elaboración de las bases protésicas para prótesis totales, utilizando insertos metálicos. Materiales y métodos: Se realizaron 30 muestras, en PMMA de termocurado,Veracryl referencian VR1 de New Stetic, distribuidas en tres (3) grupos de 10 cada una, identificadas SR (sin refuerzo), RM (refuerzo malla), RR(refuerzo rejilla). Se sometieron a fuerza vertical en un banco de deflexión, a una fuerza constante en Kgf, hasta alcanzar una fractura. El presente estudio es cualitativo in vitro. Resultados : Al comparar las muestras de acrílico para base protésicas de termocurado distribuidos en tres grupo de las muestras en sin inserto metálico (10), inserto tipo malla(10) e inserto con rejilla (10) y someterlas a pruebas de carga en un banco de deflexión, se determinó que no existe diferencia estadística significativa por estar fuera del rango p = 0.05, en cuanto a la resistencia flexural, pero si diferencias observacionales de conservación estructural por parte de las muestras con inserto (malla y rejilla) de aquellas que no los contenían y las cuales se dispersaron. Conclusiones: Se puede concluir, basados en los resultados de la herramienta estadística aplicada que la resistencia de la fractura no presenta diferencias significativa en los grupos muestra de los ensayos analizados, determinando que las muestras que contenían insertos (malla y/o rejilla), comparadas con aquellas que no contenían ningún tipo de inserto, la resistencia a la fractura para cada una de las muestras no son muy diferentes, existiendo valores ligeramente superiores en el grupo sin refuerzo.
URI : http://repositorio.uan.edu.co/handle/123456789/2734
Editorial : Universidad Antonio Nariño
metadata.dc.publisher.campus: Bucaramanga
metadata.dc.publisher.faculty: Facultad de Odontología
metadata.dc.date.created: 2020-06-04
metadata.dc.rights.uri: http://creativecommons.org/licenses/by-nc-nd/3.0/us/
Aparece en las colecciones: Odontología

Ficheros en este ítem:
Fichero Tamaño  
2020_LeonardoMantillaNieto1.18 MBVisualizar/Abrir
2020_LeonardoMantillaNieto_Autorización
  Restricted Access
264.73 kBVisualizar/Abrir  Request a copy


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons